Can a tyre blowout be repaired or does it need replacing? +
A tyre that has suffered a blowout almost always needs replacing. The internal structure of the tyre is usually destroyed by the sudden loss of pressure and the impact damage that follows. Even if the tyre appears intact, the sidewall and carcass will have been compromised. A tyre fitter can inspect it, but in the vast majority of cases a new tyre is the only safe option.
What does the TPMS warning light mean? +
The TPMS (Tyre Pressure Monitoring System) warning light indicates that one or more of your tyres has dropped below the recommended pressure. This could be caused by a slow puncture, a change in temperature, or simply natural air loss over time. Do not ignore it — under-inflated tyres increase braking distances and can overheat at speed. Check your pressures at the nearest petrol station or call a mobile tyre fitter.
What is the legal minimum tyre tread depth in the UK? +
The legal minimum tread depth in the UK is 1.6mm across the central three-quarters of the tyre, around its entire circumference. However, most motoring organisations recommend replacing tyres at 3mm, as braking performance drops significantly below this level. Driving on tyres below 1.6mm carries a fine of up to £2,500 and 3 penalty points per illegal tyre — so four bald tyres could mean a £10,000 fine and 12 points.
What should I do if I get a flat tyre on the motorway? +
Pull onto the hard shoulder as far left as possible, switch on your hazard lights, and exit the vehicle from the passenger side away from traffic. Do not attempt to change a tyre on the motorway hard shoulder — it is extremely dangerous. Move behind the crash barrier if there is one, then call a mobile tyre fitter or breakdown service. If you are on a smart motorway with no hard shoulder, stop in an emergency refuge area.
Should I check my tyre pressures regularly? +
Yes — you should check tyre pressures at least once a month and before any long journey. Under-inflated tyres increase fuel consumption by up to 3%, reduce braking performance, and cause uneven wear that shortens tyre life. Over-inflation reduces grip and causes the centre of the tread to wear faster. Your correct pressures are listed in the vehicle handbook and on a sticker inside the driver's door frame or fuel filler cap.
What happens during an MOT tyre check? +
During an MOT, the examiner checks that all tyres are the correct size and speed rating for the vehicle, that tread depth is at least 1.6mm across the central three-quarters, that there are no cuts, bulges, or exposed cords, and that tyres on the same axle are of the same type (e.g. not mixing radial and cross-ply). Incorrect tyre pressure is not an MOT failure but the examiner may issue an advisory.