How do I read my tyre size? +
Your tyre size is printed on the sidewall in a format like 205/55R16 91V. The first number (205) is the width in millimetres, the second (55) is the aspect ratio as a percentage of the width, R means radial construction, and 16 is the wheel diameter in inches. The number after (91) is the load index and the letter (V) is the speed rating. Your vehicle handbook and the sticker inside the driver's door frame show the correct size for your car.
Can I get tyres fitted at my home or workplace in Broughton-in-Furness? +
Absolutely. Mobile tyre fitting is one of the most popular services in Broughton-in-Furness. A fully equipped van comes to your home, workplace, or any safe location with the tyres you need. The fitter brings a hydraulic jack, wheel balancer, torque wrench, and all necessary equipment. Most jobs are completed in 20 to 30 minutes per tyre without you needing to leave the building.
What is the legal minimum tyre tread depth in the UK? +
The legal minimum tread depth in the UK is 1.6mm across the central three-quarters of the tyre, around its entire circumference. However, most motoring organisations recommend replacing tyres at 3mm, as braking performance drops significantly below this level. Driving on tyres below 1.6mm carries a fine of up to £2,500 and 3 penalty points per illegal tyre — so four bald tyres could mean a £10,000 fine and 12 points.
What happens during an MOT tyre check? +
During an MOT, the examiner checks that all tyres are the correct size and speed rating for the vehicle, that tread depth is at least 1.6mm across the central three-quarters, that there are no cuts, bulges, or exposed cords, and that tyres on the same axle are of the same type (e.g. not mixing radial and cross-ply). Incorrect tyre pressure is not an MOT failure but the examiner may issue an advisory.
Can a tyre blowout be repaired or does it need replacing? +
A tyre that has suffered a blowout almost always needs replacing. The internal structure of the tyre is usually destroyed by the sudden loss of pressure and the impact damage that follows. Even if the tyre appears intact, the sidewall and carcass will have been compromised. A tyre fitter can inspect it, but in the vast majority of cases a new tyre is the only safe option.
How old can tyres be before they need replacing? +
Even if the tread looks fine, tyres degrade over time as the rubber compound hardens and loses grip. Most manufacturers recommend replacing tyres after 5 years of use, and no tyre should remain in service for more than 10 years from the date of manufacture. You can check the age using the DOT code on the sidewall — the last four digits show the week and year of manufacture (e.g. 2319 means week 23 of 2019).