What is the difference between budget and premium tyres? +
Premium tyres from manufacturers like Michelin, Continental, and Bridgestone consistently outperform budget alternatives in independent braking tests — often stopping several metres shorter in wet conditions. They also tend to last longer, produce less road noise, and offer better fuel economy. For a typical family car, the difference between a budget and premium tyre is usually £25–£40 per tyre, which most drivers recoup through longer tread life.
What is the legal minimum tyre tread depth in the UK? +
The legal minimum tread depth in the UK is 1.6mm across the central three-quarters of the tyre, around its entire circumference. However, most motoring organisations recommend replacing tyres at 3mm, as braking performance drops significantly below this level. Driving on tyres below 1.6mm carries a fine of up to £2,500 and 3 penalty points per illegal tyre — so four bald tyres could mean a £10,000 fine and 12 points.
Should I check my tyre pressures regularly? +
Yes — you should check tyre pressures at least once a month and before any long journey. Under-inflated tyres increase fuel consumption by up to 3%, reduce braking performance, and cause uneven wear that shortens tyre life. Over-inflation reduces grip and causes the centre of the tread to wear faster. Your correct pressures are listed in the vehicle handbook and on a sticker inside the driver's door frame or fuel filler cap.
Can I get tyres fitted at my home or workplace in Preston? +
Absolutely. Mobile tyre fitting is one of the most popular services in Preston. A fully equipped van comes to your home, workplace, or any safe location with the tyres you need. The fitter brings a hydraulic jack, wheel balancer, torque wrench, and all necessary equipment. Most jobs are completed in 20 to 30 minutes per tyre without you needing to leave the building.
What happens during an MOT tyre check? +
During an MOT, the examiner checks that all tyres are the correct size and speed rating for the vehicle, that tread depth is at least 1.6mm across the central three-quarters, that there are no cuts, bulges, or exposed cords, and that tyres on the same axle are of the same type (e.g. not mixing radial and cross-ply). Incorrect tyre pressure is not an MOT failure but the examiner may issue an advisory.
Do I need to replace all four tyres at the same time? +
No, you do not need to replace all four tyres at once unless they are all worn. It is best practice to replace tyres in pairs (both fronts or both rears) to maintain even handling. The newer tyres should always go on the rear axle for stability, even on front-wheel-drive cars. Mixing tyre brands on the same axle is not recommended but is acceptable across different axles.